Various Types of Woods Used in Producing Acoustic Guitars

Guitars are available in different price tags and strengths. Some also give better sounds than others. One of the factors that determine the price, durability and sound produced by a guitar is the type of wood used in fabricating it. There are two types of guitars, namely acoustic guitars and electric guitars. Four different kinds of woods can be used in producing the former while two or three kinds of woods can be used in making electric guitars. For example, the type of wood used in making the back of an acoustic guitar is different from the type of wood that can be used in making its sides. Similarly, its neck, top and fretboard are also made of different kinds of woods. The tone woods refer to the woods used in making the back and sides of a guitar. They are very important in determining the tone of the acoustic guitar. Here, we are going to consider the various woods used in manufacturing an acoustic guitar.


Alder is one of the woods that can be used in making an acoustic guitar. It has a quality that marks it out from other types of woods. It is pretty durable even though it is very light in weight. When used in making a guitar, it delivers bright and clean tone. However, in terms of its durability, it lies in between as it cannot withstand heavy abuse but can still last for a long time.


Basswood is another wood that is used in guitar making. Though it is affordable, it delivers a nice, warm and gentle tone which can be compared with that produced by mahogany. The wood is also not very weighty. Thus, it is not very durable.


Though Koa produces a nice tone, it is not popular as far as the production of guitar is concerned. Its tone is comparable with the tone of Brazilian Rosewood. Koa is a very strong wood even though it is not weighty. Thus, guitars made from Koa wood are durable and also deliver quality tones. However, Koa is not a good wood to be used for the body of the guitar. It is best suited for other parts of the guitar.


Mahogany is highly cherished in guitar making as well in woodworking industry thanks to its durability. Acoustic guitar made of Mahogany are highly expensive. Their durability is unbeatable. It is heavy and can withstand abuse as a result of everyday use. The wood also delivers good tone.


Maple is another wood that is commonly used for guitar making. Normally, it is used in making the neck of guitars. The warm and darker tone of a guitar neck made from maple can be counterbalance with Mahogany. Guitars made from this wood are highly durable, deliver bright and true sound and are of moderate weight.

Rosewood is a pricey wood in guitar making industry because of its ability to deliver quality warm tone. The wood is very heavy and durable and thus it can withstand abuse and harsh conditions. It is commonly used in making guitar necks because it can be very challenging to apply finishes to Rosewood.


Choosing a Router Table

Best Router TableA router table is a good addition to any workshop given its versatility and usefulness. Router table makes cutting to be very much efficient and effective as it frees your two handles making it easier for you to have maximum control when you are cutting. A good number of routing works such as edge profiling, routing grooves and others become very easy thanks to this added control provided by routing tables. With a router table, you will be able to carry out certain works like making of cope-and-stick joinery cuts on the rails, routing narrow stock and others that ordinarily, you will not be able to do with a handheld router. Router table today are available in a number of brands, models and designs with varying durability, table surface and other features. So, when it is time for you to purchase a router table, you need to be very careful. Here are some factors provided by Router Table Expert to take into consideration when purchasing your router table.

1. Solid but flat surface

One important part of the router table that you should not forget to check before you make your choice on the market is the top or surface of the router table. A good router table surface should be very even and solid. This is because precision is highly required in many router table works such as treating of the edge of a board and cutting of joinery. If the surface of the router table is slightly uneven, imperfections such as uneven edge profiles and skewed joints can occur. There are two reasons why you should go for a router table with a strong and rigid surface. First, the router table bears the plate, router and router lift. Thus, it has to be very rigid so it will not deflect or bent when these things are placed on it. The second reason why it should be very rigid is because downward pressure encountered by a router table when feeding wood can flex it and this can result in inaccurate cuts.

2. The base plate should be rigid and flat as well

Normally, router tables come with base plate upon which they are attached. The table top has a rabbeted opening upon which the base plate is fitted. The rigidity and flatness of the base plate can also affect the functionality of the table. The base plate supports the router’s weight and as such it is important for it to be rigid and flat. Good materials for making of such items include strong phenolic and machined aluminums. It is also important for the base to be at level with the router table’s surface. This implies that a plate-leveling system should be incorporated into the table. Four leveling screwing is normally included in a basic system. It is usually adjusted from the table’s underside.

3. Mite and T-Slots

Some tasks such as cutting a dado through a narrow piece of stock are carried out with a miter gauge. To do such a task means that miter slot should be fitted into your router table as it is used to secure not just the featherboards but also other accessories of the router table. In some router tables, stops, common attachments of the router table and featherboards are secured with T-slots. Thus, ensure that your router table comes with these features.

4. Accurate and easy-to-position fence

In the majority of router tables, the user has to press the workpiece against the fence in order to control the cut. Thus, when you are purchasing a router table, ensure that the table of your router is equal to the task. The fence is available in two types, namely, two-piece or split fence and one-piece fence.

5. Base with stability and rigidity

The base of the router table should be stable and rigid. This ensures consistent contact with the cutter which makes for clean and crisp cuts.